Mount a File System on Linux

Mounting or unmounting a file system on Linux is usually straightforward, except when it isn’t. This article teaches you how to mount and unmount file systems, as well as list available and currently mounted file systems. It also explains how to handle the case where file systems won’t unmount because they are in use.

Before You Begin

1. If you have not already done so, create a Linode account and Compute Instance. See our Getting Started with Linode and Creating a Compute Instance guides.

2. Follow our Setting Up and Securing a Compute Instance guide to update your system. You may also wish to set the timezone, configure your hostname, create a limited user account, and harden SSH access.

File Systems Available for Linux

1. On a Linux system, you can list the currently available file system types from the command line with:

   cat /proc/filesystems

   The result looks something like this list, which is from an Ubuntu 22.04 LTS Linode:

   nodev	sysfs
   nodev	tmpfs
   nodev	bdev
   nodev	proc
   nodev	cgroup
   nodev	cgroup2
   nodev	cpuset
   nodev	devtmpfs
   nodev	configfs
   nodev	debugfs
   nodev	tracefs
   nodev	securityfs
   nodev	sockfs
   nodev	bpf
   nodev	pipefs
   nodev	ramfs
   nodev	hugetlbfs
   nodev	devpts
   ext3
   ext2
   ext4
   squashfs
   vfat
   nodev	ecryptfs
   fuseblk
   nodev	fuse
   nodev	fusectl
   nodev	mqueue
   nodev	pstore
   nambtrfs
   nodev	autofs

2. You can also list the documented file systems using man filesystems.

   FILESYSTEMS(5)         Linux Programmer's Manual               FILESYSTEMS(5)
   NAME
   filesystems - Linux filesystem types: ext, ext2, ext3, ext4, hpfs, iso9660, JFS, minix, msdos, ncpfs nfs, ntfs, proc, Reiserfs, smb, sysv, umsdos, vfat, XFS, xiafs
   
   DESCRIPTION
   When, as is customary, the proc filesystem is mounted on /proc, you can find in the file /proc/filesystems  which filesystems…

   Later on in the man page, there is a short summary of each file system. It includes notes about when each was added to, and possibly removed from, the Linux kernel. For example, the minix file system was superseded by ext. It in turn was superseded by ext2. ext3 adds journaling to ext2. ext4 is a set of upgrades to ext3 including substantial performance and reliability enhancements, plus large increases in volume, file, and directory size limits.

3. Press Q to exit man filesystems.

How to List Currently Mounted File Systems on Linux

1. You can list the currently mounted file systems from a Linux command line with a simple mount command.

   mount

   The following is on an Ubuntu 22.04 LTS Linode, logged in as root:

   sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
   proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
   udev on /dev type devtmpfs (rw,nosuid,relatime,size=441300k,nr_inodes=110325,mode=755,inode64)
   devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
   tmpfs on /run type tmpfs (rw,nosuid,nodev,noexec,relatime,size=99448k,mode=755,inode64)
   /dev/sda on / type ext4 (rw,relatime,errors=remount-ro)
   securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
   tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev,inode64)
   tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k,inode64)
   cgroup2 on /sys/fs/cgroup type cgroup2 (rw,nosuid,nodev,noexec,relatime,nsdelegate,memory_recursiveprot)
   pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
   bpf on /sys/fs/bpf type bpf (rw,nosuid,nodev,noexec,relatime,mode=700)
   systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=29,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=18031)
   hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime,pagesize=2M)
   mqueue on /dev/mqueue type mqueue (rw,nosuid,nodev,noexec,relatime)
   debugfs on /sys/kernel/debug type debugfs (rw,nosuid,nodev,noexec,relatime)
   tracefs on /sys/kernel/tracing type tracefs (rw,nosuid,nodev,noexec,relatime)
   fusectl on /sys/fs/fuse/connections type fusectl (rw,nosuid,nodev,noexec,relatime)
   configfs on /sys/kernel/config type configfs (rw,nosuid,nodev,noexec,relatime)
   none on /run/credentials/systemd-sysusers.service type ramfs (ro,nosuid,nodev,noexec,relatime,mode=700)
   tmpfs on /run/user/0 type tmpfs (rw,nosuid,nodev,relatime,size=99444k,nr_inodes=24861,mode=700,inode64)

2. You can list the static file system information by displaying /etc/fstab.

   cat /etc/fstab

   The two static file systems for this instance are the root disk and the swap disk:

   # /etc/fstab: static file system information.
   #
   # Use 'blkid' to print the universally unique identifier for a
   # device; this may be used with UUID= as a more robust way to name devices
   # that works even if disks are added and removed. See fstab(5).
   #
   
   # <file system> <mount point>   <type>  <options>       <dump>  <pass>
   /dev/sda        /               ext4    errors=remount-ro 0     1
   /dev/sdb        none            swap    sw                0     0

3. You can also list and search for file systems using the findmnt command.

   findmnt

   The basic output shows the file system tree:

   TARGET                                SOURCE     FSTYPE     OPTIONS
   /                                     /dev/sda   ext4       rw,relatime,errors=remount-ro
   ├─/sys                                sysfs      sysfs      rw,nosuid,nodev,noexec,relatime
   │ ├─/sys/kernel/security              securityfs securityfs rw,nosuid,nodev,noexec,relatime
   │ ├─/sys/fs/cgroup                    cgroup2    cgroup2    rw,nosuid,nodev,noexec,relatime,nsdelegate,memory_recursiveprot
   │ ├─/sys/fs/pstore                    pstore     pstore     rw,nosuid,nodev,noexec,relatime
   │ ├─/sys/fs/bpf                       bpf        bpf        rw,nosuid,nodev,noexec,relatime,mode=700
   │ ├─/sys/kernel/debug                 debugfs    debugfs    rw,nosuid,nodev,noexec,relatime
   │ ├─/sys/kernel/tracing               tracefs    tracefs    rw,nosuid,nodev,noexec,relatime
   │ ├─/sys/fs/fuse/connections          fusectl    fusectl    rw,nosuid,nodev,noexec,relatime
   │ └─/sys/kernel/config                configfs   configfs   rw,nosuid,nodev,noexec,relatime
   ├─/proc                               proc       proc       rw,nosuid,nodev,noexec,relatime
   │ └─/proc/sys/fs/binfmt_misc          systemd-1  autofs     rw,relatime,fd=29,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=18031
   ├─/dev                                udev       devtmpfs   rw,nosuid,relatime,size=441300k,nr_inodes=110325,mode=755,inode64
   │ ├─/dev/pts                          devpts     devpts     rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000
   │ ├─/dev/shm                          tmpfs      tmpfs      rw,nosuid,nodev,inode64
   │ ├─/dev/hugepages                    hugetlbfs  hugetlbfs  rw,relatime,pagesize=2M
   │ └─/dev/mqueue                       mqueue     mqueue     rw,nosuid,nodev,noexec,relatime
   └─/run                                tmpfs      tmpfs      rw,nosuid,nodev,noexec,relatime,size=99448k,mode=755,inode64
     ├─/run/lock                         tmpfs      tmpfs      rw,nosuid,nodev,noexec,relatime,size=5120k,inode64
     ├─/run/credentials/systemd-sysusers.service
     │                                   none       ramfs      ro,nosuid,nodev,noexec,relatime,mode=700
     └─/run/user/0                       tmpfs      tmpfs      rw,nosuid,nodev,relatime,size=99444k,nr_inodes=24861,mode=700,inode64

4. You can restrict the output various ways, as described in man findmnt, to show only specific devices, mount points, or file system types, such as:

   findmnt -t ext4

   This lists only ext4 file systems:

   TARGET SOURCE   FSTYPE OPTIONS
   /      /dev/sda ext4   rw,relatime,errors=remount-ro

5. If you’re only interested in block devices, you can list them with lsblk command:

   lsblk

   Once again, this only lists our Linode’s root and swap disks.

   NAME MAJ:MIN RM  SIZE RO TYPE MOUNTPOINTS
   sda    8:0    0 24.5G  0 disk /
   sdb    8:16   0  512M  0 disk [SWAP]

How to Mount File Systems on Linux

You can mount file systems for a single session using the mount command, and permanently by editing /etc/fstab. Mounting needs to be done by an administrator, either by logging in as root or by using the sudo command. There are some cases where mounting is done automatically, like when you insert a USB flash drive. Here are a few examples using the mount command, plus the preparatory mkdir command to create the mount point.

Mount a Windows Floppy Disk

1. This command is only necessary if the /mnt/floppy directory doesn’t already exist.

   mkdir /mnt/floppy

2. Use mount with the -t flag (short for “type”) to specify MSDOS as the file system.

   mount -t msdos /dev/fd0 /mnt/floppy

   The contents of the floppy disk in /dev/fd0 should now be accessible from /mnt/floppy.

Mount a CD-ROM

1. Once again, the first command is only necessary if the /mnt/cdrom directory doesn’t already exist.

   mkdir /mnt/cdrom

2. Although not harmful, specifying -t iso9660 may be unnecessary, as Linux can usually identify the file system type of a CD-ROM automatically.

   mount -t iso9660 /dev/cdrom /mnt/cdrom

   The contents of the compact disc in /dev/cdrom/ should now be accessible from /mnt/cdrom.

Mount a Disk Drive Permanently

1. Open /etc/fstab with nano or another text editor (as root or using sudo).

   sudo nano /etc/fstab

2. Add a line at the bottom describing the new disk and its mount point. Follow the “device location type options dump pass” format, like so:

   /dev/sdc /mnt/disk-drive ext4 defaults 0 0

3. Press Ctrl + X, then Y and Enter to exit and save the file.

4. Before rebooting your system, issue a mount command and make sure that it succeeds (meaning that it picked up the omitted parameters from /etc/fstab):

   ...
   /dev/sdc on /mnt/disk-drive type ext4 (rw,relatime)
   ...

Mount a USB Drive

Most modern distros automatically mount USB drives when you insert them.

1. If that doesn’t happen, create a mount point if it doesn’t already exist.

   mkdir -p /media/usb

2. This example assumes the USB drive is on sdd1.

   mount /dev/sdd1 /media/usb

   The contents of the USB drive in /dev/sdd1 should now be accessible from /media/usb.

Mount an ISO File

1. The example below assumes that the ISO file is in the /root directory and that you are logged in as root.

   mkdir /media/iso

2. You can mount ISO image files using the loop device, specified as an option to the mount command.

   mount ~/my_image.iso /media/iso -o loop

   The contents of the ISO file in your root directory should now be accessible from /media/iso.

Mount a Remote File System

The network file system (NFS) supports mounting remote file systems as shares for local access.

1. If you don’t already have an NFS client, you need to install it using the following commands:

   apt install nfs-common

   yum install nfs-utils

2. Once you have an NFS client installed, you need to create a mount point.

   mkdir /media/nfs

3. Now edit /etc/fstab as discussed above. The new line should look like the following:

   123.45.67.8:/my_share /media/nfs  nfs defaults  0 0

4. Then you can use a partial mount command, which completes from /etc/fstab.

   mount /media/nfs

Unmounting File Systems

1. You can unmount a file system using the umount command. Either the device name or the mount point is sufficient to specify what you wish to unmount.

   umount /media/nfs
   umount /media/iso
   umount /media/usb
   umount /dev/cdrom
   umount /dev/fd0

2. If the file system is in use, you get an error message indicating that the target is busy. To determine what processes are using the mounted file system, use the fuser -m command, for example:

   fuser -m /media/usb

You can add the -l (lazy) switch to umount to instruct the system to unmount the device when it’s free. Alternatively, the -f (force) switch makes the system unmount the device right away, at the possible risk of corrupting the file system. The -f switch is primarily intended to unmount unreachable NFS shares.

Conclusion

Mounting a file system on Linux is generally a straightforward two-step process: create a mount point directory, and use the mount command to mount the device at the mount point. Unless the file system is in use, unmounting is even simpler, requiring only the umount command. File system mounting and unmounting requires you to be logged in as root, or use the sudo prefix to temporarily take on root privileges.

More Information

You may wish to consult the following resources for additional information on this topic. While these are provided in the hope that they will be useful, please note that we cannot vouch for the accuracy or timeliness of externally hosted materials.

• An introduction to Linux filesystems
• RHEL 8: Chapter 28. Mounting file systems